Names Of Parts - Pioneer SE-CL761BT Operation Instructions Manual

2. Names of Parts

Also refer to Figure 2 on the reverse side of this manual's cover.
For more information about the operation of each button, consult the
explanations given regarding each function.
1 : N-mark
2 : Micro-USB port cover
3 : Micro-USB port
4 : ( ) button
5 : ( # ) button
6 : ( ) button
7 : Self fit wing
8 : LED indicator
9 : Microphone
3. Replacing the earphone tip
Installation
Turn the earphone's skirt inside out as shown in the accompanying illustra-
tion. (see Fig. 3).
Press the mounting surface firmly onto the nozzle. Failure to press the tip
fully onto the nozzle may cause the tip to come off.
Return the inside-out skirt to its original shape.
Removal
Hold the earphone body securely and twist off the earphone tip.
4. Adjusting the cable adjuster
To adjust the cable length, pass the cable through the accessory cable
adjuster as shown in Fig. 4.
5. 4RHMFÐSGDÐRDKE ÆSÐVHMF
Angle adjustment
Adjust the self-fit wing so that it best matches the shape of your ear.
Removal
Holding the body of the earphone, hold to the round part of the self-fit wing
and pull off.
Installation
To install, align the self-fit wing with the earphone's attachment groove and
press on.
9
En