Page 2
Directiva Svenska: 1999/5/CE. Härmed intygar Pioneer att denna [*] står I överensstämmelse med de Pioneer tímto prohlašuje, že tento [*] je väsentliga egenskapskrav och övriga ve shodě se základními požadavky a relevanta bestämmelser som framgår dalšími příslušnými ustanoveními av direktiv 1999/5/EG.
Page 3
øvrige relevante krav i direktiv 1999/5/EF. základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Íslenska: Pioneer izjavlja, da je ta [*] v skladu z [*] er í samræmi við bistvenimi zahtevami in ostalimi grunnkröfur og aðrar kröfur, sem gerðar relevantnimi določili direktive eru í...
Page 6
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
WARNING WARNING This equipment is not waterproof. To To prevent a fire hazard, do not place any prevent a fire or shock hazard, do not place naked flame sources (such as a lighted any container filled with liquid near this candle) on the equipment.
Page 8
Informational Note for Customers in U.S.A. Only: WARNING: This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. D36-P5_C1_En This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
• Never inspect the inside OR remodel this machine. This device includes high-voltage internal parts, and contacting them could result in fire or electrical shock. If the cus- tomer remodels this machine, PIONEER will no longer guarantee its performance. Precautions for use •...
Page 10
Speciications Transmission format ............Bluetooth Standard Protocol Ver. 4.0 Output ..............Bluetooth Standard Protocol Power Class 2 Maximum transmission distance ..........About 10 m line of sight *1 Frequency used ............2.4 GHz (2.4000 GHz to 2.4835 GHz)*2 Modulation ........................FHSS Supported Bluetooth profiles ............A2DP, AVRCP, HFP, HSP Supported CODEC ..................SBC, AAC, aptX®...
• “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth word mark and logos are registered trademarks owned by Bluetooth ® SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade names are those of their respective owners.
1. Set Contents Confirm the presence of all parts and components before use. 1 : Headphones 2 : Micro-USB cable 3 : Headphone cord 4 : Warranty (Europe/Japan) 5 : Operating instructions (this document) 2. Names of Parts Also refer to Figure 2 on the reverse side of this manual’s cover. For more information about the operation of each button, consult the explanations given regarding each function.
3. Charging the batteries The unit’s battery must be recharged before use. The accessory micro-USB cable must be used for recharging the unit’s battery. Connect the appropriate connector on the accessory micro-USB cable to the micro- USB port on the headphones, and the USB plug on the other end to a USB port on a computer.
Page 14
• For operating details consult the user’s manual for the device to be connected. (3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “SE-MJ771BT”. • Pairing is completed if the LED indicator blinks in blue once every three seconds.
Page 15
5. Using NFC for pairing When a smart phone or tablet device is equipped with NFC, Bluetooth pairing (and depairing) can be performed simply by merely swiping the device over the headphones. • Supported OS: Android 4.2 and later. • Depending on the smart phone or tablet device used, the NFC signal reception may be too weak to perform one-touch connections.
6. Enjoying music To use the wireless headphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile. For details on how to perform pairing, see P.10. (1) With power to the wireless headphones’ turned off, hold the ( ) button depressed for about three seconds.
Page 17
7. Vocal communication To use the wireless headphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP). For details on how to perform pairing, see P.10. * If the Bluetooth device supports both profiles HFP and HSP, use the profile HFP. (1) With power to the wireless headphones’...
8. LED indicator Operation LED indicator When not connected to a Bluetooth device LED flashes blue twice every three seconds. Pairing mode LED alternately flashes blue and red. When connected to a Bluetooth device LED flashes blue once every three seconds. During recharging LED lights red.
Need help?
Do you have a question about the SE-MJ771BT and is the answer not in the manual?
Questions and answers