Controls And Features - Monogram ZIDI240 Owner's Manual

Double-drawer built-in refrigerator
Table of Contents

Advertisement

Temperature
control
Child control
lockout
Unit ON/
OFF
Interior fan
8
The temperature display shows the
actual temperature of the double-drawer
refrigerator. The actual temperature may vary
slightly from the set temperature based on
factors such as drawer opening, amount of
food and room temperature.
To change the temperature setting, press
the WARMER or COLDER pads until you
reach the desired set temperature. After 5
seconds, the display will return to the actual
temperature.
This child control lockout feature prevents
unwanted changes to your temperature
settings.
This pad stops cooling in the
double-drawer refrigerator, turns
off the temperature controls and
removes power to the light circuit.
The interior fan located in the rear wall of
the double-drawer refrigerator may run for
extended periods due to usage and ambient
temperature. This is normal. See Normal
operating sounds in Problem Solver section
for additional information about the fans. The
interior fan will turn off when the drawer is
opened.

Controls and Features

Double-Drawer Refrigerator
Allow 12–24 hours for the double-drawer
refrigerator to reach the temperature you have
set.
Temperature Settings
Minimum: 34°F (1.1°C)
Maximum: 45°F (7.2°C)
After the desired temperature is set, the
temperature can be locked. To lock, press
both the + and – pads at the same time for
five seconds. To unlock, press both + and –
pads for five seconds.
Press this pad for a minimum of 3 seconds to
turn the double-drawer refrigerator on or off or
unplug the unit for long vacations or absences,
or when cleaning the unit or changing the light
bulb.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zids240

Table of Contents