Lighting Instructions - Napoleon GPFR40 Manual

Outdoor gas patio flame table
Hide thumbs Also See for GPFR40:
Table of Contents

Advertisement

Available languages

Available languages

Lighting Instructions
Igniter
WARNING!
Keep face and body away from burner area when lighting.
WARNING!
Ensure burner controls are in the off position. Slowly turn on the gas supply valve.
2. Turn the burner control to the low position, press and hold in. When the burner
3. Continue to depress the burner control knob for 30 seconds and then release. If the
4. Adjust the flame to the desired height with the burner control knob.
5. If the burner will not light with the electronic igniter, hold a lit long match or lit long
butane lighter to the ignition area of the burner and continue with step 2.
6. To shut down the burner turn the burner control knob clockwise to the off position.
Then turn the gas off at the source (propane cylinder valve or natural gas supply
WARNING!
If the burner does not light within 10 seconds, turn the valve off and wait 5 minutes
for any gas to dissipate before repeating the procedure.
1. Press and hold electronic igniter button ( ).
lights, release the electronic igniter button.
flame goes out, repeat the procedure.
valve).
11
EN
Contol Knob
www.napoleongrills.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vict1Vict2Gpfs40Gpfc40Vict3

Table of Contents