Basic Settings - Endress+Hauser Thermophant T TTR31 Operating Manual

Operation

5.1.3 Basic settings

Base
!"#$ !"#$ !"#$ !"#$
12
Basic settings
%&'( %&'( %&'( %&'(
Technical unit
-$./ -$./
-$./ -$./
Configure zero
point
2$(3- 2$(3- 2$(3- 2$(3-
Accept zero point
4'#5 4'#5
4'#5 4'#5
Display
("% ("%
("% ("%
Damping:
display value, out-
put signal
4$#' 4$#'
4$#' 4$#'
DESINA
#"+* #"+* #"+* #"+*
Safety confirmation
#"+. #"+.
#"+. #"+.
Safety release code
)* )* )* )*
Select technical unit:
°C
)+ )+
)+ )+
°F
K
, , , ,
010 010
010 010
Position adjustment:
within ±10 °C/K (±19 °F)
of the upper range limit
010 010 010 010
No settings possible (not
available in PC software)
56 56
56 56
PV: measured value
display
56./ 56./
56./ 56./
PVRO: measured value
display rotated 180°
#5 #5 #5 #5
SP: set switch point
display
#5./ #5./ #5./ #5./
SPRO: set switch point
display rotated 180°
/++ /++
/++ /++
OFF: display off
OFFR: display off rotated
/++. /++.
/++. /++.
180°
010 010
010 010
0...40 s
&/ &/
&/ &/
Connection in accord-
ance with DESINA
7$# 7$# 7$# 7$#
guidelines
&/ &/ &/ &/
Operation with increased
functional safety (in
7$# 7$#
7$# 7$#
development). Factory
setting NO should not be
changed
0 0 0 0
Enter the calculated safety
code of the PC Software
TTR31, TTR35
Endress+Hauser