Table of Contents
Advertisement
DRAINING - FILLING - BLEEDING: HYDRAULIC SUSPENSION/STEERING CIRCUIT
C5
Rear height:
Slacken, by one turn, the screw (3) on the clip (4).
Retighten the screw by hand.
To decrease the height, turn the clip (4) towards the rear of the vehicle.
To increase the height, turn the clip (4) towards the front of the vehicle.
Repeat the operation until you obtain the calculated dimension H2C (± 10 mm).
Tighten the screw (3) to 0,6 m.daN.
Adjust with diagnostic tool [2] or [3].
B3DP08JC
319
Advertisement
Table of Contents
