Table of Contents
Advertisement
C5
AUXILIARY EQUIPMENT DRIVE BELT
[1] Dynamic tensioner compressure lever
[2] Dynamic tensioner roller retaining peg Ø 4mm
Removing.
Remove the splash-shield, under-engine sound-deadening, front RH wheel.
WARNING: Mark the direction of fitting of the auxiliaries drive belt in the case of re-use
of the belt.
Compress the dynamic tensioner roller (1) by acting at «b» (anti-clockwise), using tool [1].
Peg using tool [2] at «a».
IMPERATIVE: Check that the roller (1) turns freely (without play and without tight spots).
Refitting.
Refit the auxiliaries drive belt.
IMPERATIVE: Make sure that the auxiliaries drive belt is correctly positioned in the
grooves of the various pulleys.
Compress the dynamic tensioner roller (1) by acting at «b», using tool [1].
Remove tool [2] at «a».
Refit the splash-shield, under-engine sound-deadening, front RH wheel.
B1BP31AD
104
Engines: RHL - RHR
Tools.
: (-).0188.Z
: (-).0188.Q1
Advertisement
Table of Contents
