Table of Contents
Advertisement
C5
4 HP 20 GEARBOX: CONTROL SPECIFICATIONS
Engine: 4HX
On refitting.
New gear selection control.
Couple the ball-joint (3).
Push in the component (16) without bending the cable.
Release the component (16).
Lock the adjustment by means of component (17).
Check all the gear selection control positions.
Re-used gear selection control.
Unlock component (17).
Release the component (16).
Couple the ball-joint (3).
Push in the component (16) without bending the cable
Release the component (16).
Lock the adjustment by means of component (17).
Check all the gear selection control positions.
Complete the fitting in the opposite order to removal (see corresponding procedure).
B2CP3DWD
247
Advertisement
Table of Contents
