Using Pcmcia Cards - AVERATEC C3500 User Manual

C
onvertible Tablet PC
3. To remove the disc, press on the center spindle and pull up the disc from
the side until the disc snaps out of the spindle lock.
+
If the eject function is disabled by software or a power failure occurs, the
Emergency Eject Hole allows you to manually remove a CD from the
reader.
4. To close the combo drive, simply push the CD tray inside. The combo
drive LED will activate when the disc is detected. Wait until the LED has
turned off and then start to read the disc.
How to care the CD
When you handle CDs, pay attention to the following guidelines:
1. Always pick up the CD by its edges.
2. Avoid scratching or soiling either side of the CD.
3. Do not write with a ball-point pen or apply labels on either side of the
CD.
4. Keep the CD away from direct sunlight or high temperatures.
5. Clean fingerprints or dust from the CD by wiping it with a soft cloth.
The above points also apply to other optical storage media.
+
The Combo drive is a Class 1 Laser Product.
3.8

Using PCMCIA Cards

To allow manufacturers to add functions and technologies in the PC Card form
factor, PCMCIA has defined two PC Card types:
60
Type Thickness Sample Devices