Related Manuals for Citronic ru210
Summary of Contents for Citronic ru210
- Page 1 RU210 Dual Multi-UHF Wireless System Item ref: 171.970UK, 171.971UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing the Citronic RU210 wireless system. This professional wireless set provides 2 high quality microphones with a PLL tuned UHF radio system for freedom of movement without loss of audio quality. Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get the best performance from your purchase.
- Page 3 Receiver 1. Channel A output volume control 10. IR sync sender 2. Channel A Group/Channel setting up 11. Power on/off switch 3. Channel A Group/Channel setting down 12. DC power in jack (5.5 x 2.1mm) 4. Channel A Group/Channel set 13.
- Page 4 Setting Up Insert the supplied AA batteries into each of the transmitters by carefully unscrewing the base of the handheld microphone or opening the flap of the bodypack to reveal the battery compartment. Insert the batteries (ensuring that + and - are the correct way round for each cell) and carefully replace each cover.
- Page 5 Tuning For each microphone, the carrier frequency may be selected on the receiver unit by pressing the SET button twice, which causes the GROUP label to flash in the display. The ▲ and ▼ buttons can be used to select the Group from 1 to 7. Pressing the SET button again causes the CHANNEL label to flash.
-
Page 6: Specifications
Check that transmitter batteries are good / charged no “RF” or “AF” LEDs Ensure that genuine Citronic RU series transmitters are being used. Ensure transmitter and receiver frequencies are synced (see “Tuning”) Check that transmitter switch is not in “MUTE” position “POWER”...
Need help?
Do you have a question about the ru210 and is the answer not in the manual?
Questions and answers
How long do the transmitter batteries last?