Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Riotoro CR480
Summary of Contents for Riotoro CR480
- Page 1 RIOTORO CR480 Installation Guide...
-
Page 2: Included Hardware
Welcome to RIOTORO Thank you for purchasing the RIOTORO CR480. The CR480 chassis squeezes raw computing power into in a cool, quiet and elegant PC that compliments any office while occupying minimal little desk space. Note This manual is a guide for RIOTORO’s computer cases. For instructions on installing the motherboard and other components, please refer to their documentation. - Page 3 1) Front panel 2) I/O shield cutout USB 3.0 ports 3) PCI-E expansion slots Microphone jack 4) Power supply bay Headphone jacks Power switch Reset switch Hard Disk Drive LED...
-
Page 4: Before You Begin
Before You Begin Please take the following precautions: Handle all PC components and cards with care. Hold cards and processors by their edges to avoid damaging components. To avoid damaging components by electrostatic discharge, periodically ground yourself by touching an unpainted metal surface or by using a wrist grounding strap. -
Page 5: Install The Motherboard
Remove each panel by slide the panel toward the rear. Install the motherboard The CR480 is compatible with ATX motherboards enabling you to build a high-performance PC. Let’s install one. 1. Install the CPU, CPU cooler and memory on the motherboard. -
Page 6: Install Hard Drives And Ssds
Install Hard Drives and SSDs The CR480 has one 3.5” drive bays and two 2.5” drive bays. These bays are located in the compartment under the motherboard. To install a 3.5” hard drive The Cr480 supports up to three 3.5” HDD that can be accommodated without the use of tools. - Page 7 To install drives into the 2.5” mounts The CR480 case has two mounts for 2.5” drives such as solid state drives (SSD).. To mount a 2.5 drive: place the 2.5” drive and align the drive to a position where it can be secured.
- Page 8 To install 5.25” inch optical Drive 1. Remove the plastic cover from the front Bezel, the CR480 supports a total of 2 Optical Drive bays. Each protected by a plastic cover. 2. Once the cover is removed slide the unit into the bay, until the drive is totally secured By the...
-
Page 9: Attach Cables
Attach Cables Connect the Front Panel Switches and LEDs The CR480 front panel switches, LEDs, and USB ports have wire leads that need to be attached to header pins the motherboard. Refer to your motherboard manual to locate the proper motherboard header pins and attach the cable connectors listed below. -
Page 10: Install The Power Supply
Attach the case fan cables The CR480 comes with two 120mm fan —a front intake fan and a rear exhaust fan. 1. Connect the 3-pin connector of each fan to a 3 pin fan header on your motherboard. Refer to your motherboard manual for more information. -
Page 11: Specifications
Specifications Motherboard support Mini-ITX Drive bays - 3x 3.5” - 2x 2.5” Front panel I/O - 2x USB 3.0 ports - 1x Headphone out - 1x Microphone in Expansion slots Fans Fans included - 1x 120mm front intake - 1x 120mm rear exhaust PSU support Standard ATX Max. - Page 12 Technical Support and Customer Service US & Canada 1-888- 270-7090 support@riotoro.com customerservice@riotoro.com Sales sales@riotoro.com © Copyright 2016 RIOTORO. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or part without written permission is prohibited.
Need help?
Do you have a question about the CR480 and is the answer not in the manual?
Questions and answers