Print Condition Transmission - Hitachi RX Technical Manual

5.3.5 Print Condition Transmission

5.3.5-1 Text
(1)Line count / print format uniformity
ESC2
● Line count and print format are made uniform for all print items.
● Line count of all rows are made uniform based on the first row.
● Space between stages, character size, space between characters, whether or not to use bar code and
double width size are made uniform based on the setting value of the first print item.
● Send the message independently. The message cannot be sent together with print format, print
specs., and print contents.
[Existing machine message] Existing machine message can also be used.
ESC
(2)Configuration of print format text
● Print item not specified
Print format text
If item No. is not specified, it is set for all items.
To transmit print format and print specs. consecutively, transmit in the order of
2
and print specs. If transmitted the other way round, an error will occur.
● Print item specified
ESC2
Item No. specified (1 to 100)
Only specified print item is applicable for change.
[Existing machine message] Existing machine message can also be used.
ESC2 Header 24H
Item No. specified (1 to 100)
Header 22H Classification 31H
Header 2BH 30H
Header 70H Item No.
Item No. Print format text
Print format text
●Transmission Sequences 5-12
print format
1