Print Data - Hitachi RX Technical Manual

b

Print data

Select the contents and conditions of the characters to be printed.
Print data
Prints using the following test conditions:
・Number of lines
・Character size
・Inter-character space
・Character height
・Character width
・Ink drop use
・Print character description :■■nn123ABC
Confirm that the IJ printer is in the Standby state and press Nozzle test .
3
● The Nozzle property test screen is displayed. The IJ printer enters the Ready to print state.
Nozzle property test
Excitation V-ref.
c
Ref. ambient temperature
Automatic update
d
Incremental change
Print trigger source
Print data
Excitation V-ref. is printed on the print target.
［■■ｎｎ・・・・・・］
Printing starts at the press of [Start printings].
c Excitation V-ref.
Input the set value you want to print. (Set value is 00 to 19.)
Change the setting using
d Automatic update
Select whether or not to automatically switch to the next set value after printing one setting.
Disable : Set value does not change.
Dec.
Inc.
At "Inc.", the change width by which the value is automatically switched is set.
6-20 ●Excitation V adjustment
Data to be displayed
For test
Prints using the currently set print
description and print conditions.
: 1 line
: 12 X 16 dots
: 1
: 99
: 5
: 1/3
(nn: Excitation V set value)
[Ready
(0∼19)
− 09 ＋
(℃)
23
Inc.
1 (1∼9)
Button input Sensor
For test Data to be displayed
or input a value by touching the number.
− ＋
: Set value is automatically decremented at each printing.
: Set value is automatically incremented at each printing.
] 2015.07.07 12:45
Com=0
Abort
Start
printings