Advertisement
Operation of Controls
TOP CONTROL
LAMP REPLACEMENT )NDtCATOR
Light is orange when protection iamp is nearing end of service life.
TEMPERATURE WARMtNG )NDtCATOR
F!ashes red when intema! projector temperature is too high.
READY )MDtCATOR
Light is green when projector !amp is ready to be turned on.
LAMP POWER )ND)CATOR
Light is dim when the projector is on.
Light is bhghtened when the projector is !n stand-by mode.
LAMP POWER ON/OFF BUTTON
Used to turn projection !amp on or off.
VOLUME BUTTONS
Used to adjust voiume.
FJNE SYNC BUTTONS
Used to adjust fine sync.
MODE BUTTON
Used to saiact video source.
(Computer 1. Computer 2 or Video 1 input)
NORMAL BUTTON
Used to reset to normat picture adjustment preset by factory.
SYSTEM BUTTON
^ Computer Mode
Use this button, the PO)NT UP/DOWN/LEFT/R)GHT buttons and the SELECT button to se)ect computer system.
^ V)DEO Mode
Use this button, the PO!NT UP/DOWN/LEFT/R!GHT buttons and the SELECT button to seiect co)or system.
MENU BUTTON
This button wh! activate the MENU operation.
Use this button, the FONT UP/DOWN/LEFT/RfG
operation.
ZOOM BUTTON
Used to setect power zoom !ens adjust-
FOCUS BUTTON
Used to setect focus adjust.
HT buttons and the SELECT button to mahe adjustments to the projector's setting in MENU
PO!NT UP/DOWN/LEFT/RtGHT BUTTONS
W To select an item on the MENU that you want to adjust. To se!ect an item. move the arrow by pressing these buttons (UP. DOWN. LEFT or
RiGHT).
j ^
M
'
^ Used to operate power zoom tens or power focus system. (Pressing these button either UP or DOWN)
Advertisement
