Advertisement
IIC data adjustment
Service Mode
To change the mode from the normsd mode to the "Service mode" by pressing the " MENU " Button and
" NORMAL" Button on the projector s'mujtaneous and hotd for 3 seconds.
To change the mode from the Service mode to the "normal mode" by pressing the " POWER ON/OFF " Button on
the projector or remote centre) unit -
!!C Data Adjustment
When repjacing efectricat parts, readjust tfC data. as necessary.
Data for each item is adjusted by "FfNE SYNC +/-" Button and " VOLUME +/-" Button on the projector or remote
centre) unit.
The "F)NE SYNC i-" Button and "F)NE SYNC - " Button change the adjustment item. and "VOLUME ^ " Button and
"VOLUME - " Button change the adjustment va)ue. The picture is changes 2 to 3 seconds after the va)ue is changed.
Norma] Mode
Service Mode
))C data adjustment
Data no.
Data
' \
!
\
Service
Mode
the adjustment vafue ^.'
the adjustment item
19
Advertisement
