Advertisement
L Convergence Adjustment J
)^ Before Adjustment ]
Make sure each Red, Green, B!ue LCD
panet unit has been correctty instated,
and that a)i focus adjustments have been
comp)eted before performing conver-
gence adjustments-fSee Focus Adjust-
ments)
Use a grid pattern for adjustment. First
make a rough adjustment using a video
signa) and then fine adjust by using a
computer signa!.
For convergence adjustment, use Green
as the reference standard. Aftgn Red
and B!ue with Green by adjusting the
position and angte of the Red and B!ue
LCD panets. Screws "A", "B" and "C"
(Fig.7 & 8) are for convergence adjust-
ment.
ftgi
Red or
Buie.
J.
t
/
Green
**
ft93
i
fig 2
. ' *
fig 4
. . . . . . . L . -
^
\
ffg5
f)g6
( image Movement According to
Adjustment Screw Turning
Direction ]
1. Turning adjustment screw "A" turns
the image. (Fig.1 &2)
2. Turning adjustment screw "B" moves
the image right and left. (Fig. 5 & 6)
3. Turning adjustment screw "C" moves
the image up and down.(Fig. 3 & 4)
24
Advertisement
