Safety Information; Preliminary - Mastech MS8221C Instruction Manual

DIGITAL MULTIMETER
1.

SAFETY INFORMATION

To ensure safe operation, and in order to exploit to the
full the functionality of the meter, please follow the
directions in this section carefully.
This multimeter
IEC-61010-1 concerning electronic measuring instruments
with an overvoltage category CAT ΙΙΙ 600V and pollution 2.
Follow all safety and operating instructions to ensure that the
meter is used safely and is kept in good operating condition.
With proper use and care, the digital meter will give you
years of satisfactory service.

1.1 PRELIMINARY

1.1.1 When using the meter, the user must observe all
normal safety rules concerning:
• Protection against the dangers of electrical current.
• Protection of the meter against misuse.
1.1.2 When the meter is delivered, check that it has not been
damaged in transit.
1.1.3 When poor condition under harsh preservation or
shipping conditions caused, inspect and confirm this
meter without delay.
1.1.4 Test leads must be in good condition. Before using
verify that the insulation on test leads is not damaged
and/or the leads wire is not exposed.
1.1.5 Full compliance with safety standards can be
guaranteed only if used with test leads supplied. If
necessary, they must be replaced with the same model
SAFETY INFORMATION
WARNING
has been designed according to
- 1 -
4