Table of Contents
Advertisement
6
First installation
For fast and successful start-up, check that your receiver is
connected to the wall socket,TV set and other equipment
according to the diagrams in chapter 5.
Switch on the receiver and TV set.The welcome screen
appears. Press <OK> to access the Easy installation screen.
6.1
Easy installation
The Easy installation screen prompts you to select your
favourite menu language.
Select your favourite menu language and press <OK> to
store the language setting and start scanning for channels.
6.2
Channel scanning
During the scanning process, the following information is
reported on screen:
- the number of TV and Radio channels detected,
- the scanning progress, indicated as a percentage,
- the strength of the signal and the quality of reception.
Note: if you press <BACK> during the scanning process, you
return to the Easy installation screen. In this case, none of
the channels found are stored.
When scanning has been successfully completed, a
completion message is displayed as well as the number of
channels detected.
Press <OK> to store the channels found and tune the
receiver to the first channel in the list.
FIRST INSTALLATION 15
Advertisement
Table of Contents
