Table of Contents
Advertisement
26 MENU
8.5.1
Recording timer
Select the Record Timer item from the Timer sub-menu or
press the <TIMER> key of the remote control to access the
Recorder screen.
To activate a recording timer:
- Select values for the following:
• Timer number: used to identify the timer. Select the
number corresponding to the timer you want to use.
• Channel Name: select the channel on which the
programme you want to record is broadcast using the
or
key.
u
i
Note: alternatively, press <OK> when the highlight is on Channel
Name to display the list of available channels. Then scroll to
the desired channel and press <OK> to select it.
• Timer Type: select Daily to record once every day,
Weekly to record once every week, Monthly to record
once every month, or One time for a single recording
at the selected time. Select Disable to cancel the timer.
- Depending on the timer type, proceed with the following:
• Month: select 1 for January, 2 for February, etc. using
the
or
key for a single recording.
u
i
• Date: select a date using the
monthly recordings.
• Start time: select a start time using the
modify the default time in steps of 10 minutes or
numerical keys.
• End Time: select a end time using the
modify the default time in steps of 10 minutes or
numerical keys.
- Press <OK> to confirm.
Note: when a recording timer is active, you cannot change digital
channels, but you can switch to analogue TV using the
<TV/STB> key and zap through analogue channels.
or
key for single and
u
i
or
key to
u
i
or
key to
u
i
Advertisement
Table of Contents
