Compaq P1100 Service Manual page 10

How to Adjust Screen Settings
To launch the on-screen display Main Menu:
1. Press the Menu button 3 on the monitor front panel. The
Main Menu will display on the monitor screen.
2. To select an item from the Main Menu, scroll down by
pressing the down arrow button 1 located on the monitor
front panel. To reverse or back up, press the up arrow button
2.
3. The item to be selected will be highlighted in yellow. Press
the Menu button 3 again.
1 2 3 4 5
Monitor with On-Screen Display
The bar on the bottom of the OSD menu shows the
current operating frequency (and resolution if VESA
standard).
English 1-9
4. A second-level menu displays and adjustment scale. Use the
arrow keys 4 or 5 to select a value on the adjustment scale.
5. Press the Menu button 3 to exit from that adjustment.
6. To exit from the on-screen menu, press the Menu button
again.
Press Reset to return the adjustments to their original settings.
Troubleshooting
Special OSD Messages
Special OSD messages will appear on the monitor screen when
identifying the following monitor conditions:
Monitor is Working out of Scan Range, Change PC Settings
Indicates the monitor is unable to operate with the selected
input signal. Readjust your video setting to a lower resolution.
Monitor in Power Save Mode, Activate Using the PC
Indicates the monitor is in one of the power saving modes.
Monitor is Working, Check Signal Cable
Indicates the video cable may not be plugged into the
computer.
Self Diagnosis
If the screen goes blank and the LED is green, remove any video
connections from video connector 1 or 2. You can also turn off the
PC. Press the power switch twice to turn the monitor OFF then ON
again. Press the right arrow button
monitor enters power saving mode. If a color bar pattern appears
then it is likely the problem is not the monitor. Please check the
condition of your computer. If the color bar pattern does not appear,
please inform your service representative of the monitor's condition.
If the power LED is flashing orange, please make note of the
frequency of flashing and inform your service representative of this
frequency.
1-10 English
(contrast increase) before the