Sony XCI-SX100C Technical Manual page 16

• Y16:
An output mode that uses Y10 bit to represent 1 pixel.
• RAW16 (color models only):
An output mode without color processing that uses 10
bits to represent 1 pixel.
Y16/RAW16
• RGBp (color models only):
A mode that uses 8 bits each to represent the R/G/B for
1 pixel and outputs to each respective R/G/B buffer
area.
• YUVp (color models only):
A mode that uses 8 bits each to represent the Y/U/V
for 1 pixel and outputs to each respective Y/U/V
buffer area.
• Y+RGBp (color models only):
A mode that processes Y8 and RGBp simultaneously.
RGB plane
YUV plane
YRGB plane
16
• BGRi (color models only):
A mode that uses 8 bits each to represent the B/G/R for
1 pixel and outputs to a single buffer area layer.
• YUVi (color models only):
A mode that uses 8 bits each to represent the Y/U/V
for 1 pixel and outputs to a single buffer area layer.
RGB interleave
YUV interleave
• Y+BGRi (color models only):
A mode that processes Y8 and BGRi simultaneously.
Y+RGB
interleave
Note on switching video formats
Never switch video formats while data transfer is in
progress, as doing so may result in malfunction.