Bosch MMB1 series Operating Instructions Manual page 7

Blender_Maxi_en-es-id-th-2zh.book Seite 7 Donnerstag, 17. Juli 2014 12:42 12

Fig.
Insert blender blade into the blade holder

and lock by turning it to the left.
Attach blender jug to the drive

on the motor block.
Attach blender jug by turning it all the way

clockwise.
The coloured mark on the blade holder
must be visible in the cutout on the motor
unit!
Add ingredients.

Attach lid and press firmly.

The cover can be attached in 2 positions.
a)with outlet opening forwards for pouring
out the blended ingredients.
b)with outlet opening backwards, contai-
ner closed.
Insert measuring cup into feed tube and

turn it anti-clockwise.
Insert the mains plug.

Rotate the switch to the required setting.

Grip the edge of the lid while operating

the blender.
Do not reach over the feed tube or spout!
Add more ingredients:
Set the rotary switch to 0/off.

Wait until the drive comes to a standstill.
Either
Remove lid.

Add more ingredients.

or
Take out measuring cup.

Add liquids and solid (fairly small) ingre-

dients through the feed tube in the lid.
Switch on appliance again.

Working with the smoothie insert
With this insert it is particularly easy to make
smoothies made of fresh fruits, milk, soya
milk, yoghurt and juices.
Fig. 
Prepare the blender and attach to the

motor block as described above.
Insert the smoothie insert into the blender

jug.
Attach lid with outlet opening forwards

(for pouring out the smoothie later).
Put ingredients through the feed tube into

the blender jug; chop up fruit beforehand
if required.
Robert Bosch Hausgeräte GmbH
Warning!
Do not put large, hard ingredients in the
blender jug, e.g. stones from avocados
or plums.
Insert measuring cup into feed tube

and turn it anti-clockwise.
Insert the mains plug.

Switch on appliance at a setting with

a high operating speed.
Note: Appliances which feature a smoothie
programme button can provide the optimum
speed and switch-on time for making
smoothies.
After using the appliance
Set the rotary switch to 0/off.

Wait until the drive comes to a standstill.
Remove mains plug.

Remove the blender by rotating

it in an anti-clockwise direction.
Pour the contents out of the blender jug

through the opening in the lid (plastic
blender).
or
Take the lid off the blender jug.

Empty blender jug.

Clean all parts, see "Cleaning and

servicing".
Grinding attachment
for chopping up dry, hard ingredients,
e.g. coffee beans, pepper corns, sugar,
poppy seeds, chili, nutmeg.
m
Risk of injury from sharp blades/
rotating drive!
Do not remove or attach grinder attach-
ment until the appliance has been
switched off and the drive has come
to a standstill.
Fig. 
Add food, which is to be cut, in the jug.

Fill up to the upper edge of the jug only!
Attach lid to the grinding cup and lock

by turning it anti-clockwise.
Attach grinder attachment to the drive

on the motor block.
en
7