Hyundai Sonata LF Owner's Manual page 200

Convenient features of your vehicle
Listed below are the examples of
proper switch settings. For loading
conditions other than those listed
below, adjust the switch position so
that the beam level may be the near-
est as the condition obtained accord-
ing to the list.
Loading condition
Driver only
Driver + Front passenger
Full passengers (including driver)
Full passengers (including driver)
+ Maximum permissible loading
Driver + Maximum permissible
loading
3-104
Automatic type
It automatically adjusts the headlight
beam level according to the number
of passengers and loading weight in
the luggage area.
And it offers proper headlight beam
under various conditions.
Switch
position WARNING
0
If it does not work properly even
0
though your car is inclined
1 backward according to passen-
ger's posture, or the headlight
2
beam is irradiated to the high or
low position, we recommend
3 that the system be inspected by
an authorized HYUNDAI dealer.
Do not attempt to inspect or
replace the wiring yourself.
Headlamp washer (if equipped)
Washer fluid will be sprayed on the
headlamps at the same time you
operate the windshield washer when:
1. The ignition switch is in the ON
position.
2. The light switch is in the headlamp
position (low beam).
i
Information
• Check the headlamp washers peri-
odically to confirm that the washer
fluid is being sprayed properly onto
the headlamp lenses.
• The headlamp washer can be oper-
ated 15 minutes after the last opera-
tion.