Installing The Internet Gateway And Smart Phone/Tablet App; Installing Hardware And Connecting To Your Home Wi-Fi/Internet Router - Astralpool Viron Connect 10 Installation And Operating Instructions Manual

Part Two: Installing the Internet Gateway and Smart Phone/Tablet App
The Internet Gateway is an optional purchase that allows the Connect 10 Pool and Spa Controller to connect to
the internet, via a Wi-Fi or Ethernet connection , to a home Router. Downloading the free App 'connectmypool'
and correctly setting up all equipment will allow the pool owner to control the pool and spa from their Smart
Phone or Tablet.
The installation of the Connect 10 Internet Gateway is a simple three stage process. Follow these instructions carefully and you
will have instant access to control your pool and spa every time, no matter where you are: in your house, on the way home
from work, or on the way to your holiday home.
Stage 1: install the hardware and connect to your home Wi-Fi or internet Router.
Stage 2: register your pool owner's details and any other authorised users at www.connectmypool.com
Stage 3: Download the Connectmypool App from the App store or Android Store
Stage 1 – installing the hardware and connecting to your home Wi-Fi or
Internet Router.
The most common way of connecting the 'Internet Gateway' (Part # 10030) to the internet via a home Wi-Fi connection is
shown below. Wherever possible though, it is always recommended to connect via Ethernet cable as seen in option 2. Use of
options 1 & 3 are recommended for retrofitting control system to existing pool system, or where cable installation is impossible.
If area is known to have poor Wi-Fi or reception quality, then cable installation is highly recommended.
Option 1 – Wi-Fi to Home Modem connected to Broadband Internet Connection.
Connect RJ12 cable from controller to 'Internet gateway'. 'Internet gateway' will connect via Wi-Fi to home router when in
signal range.
Option 2 – 'Internet Gateway' to Home Computer via Ethernet cable to Home Model
Connect RJ12 cable from connect controller to 'Internet gateway', then Ethernet cable directly to router
40
INST314 CONNECT10 COLOUR TOUCH SCREEN V12-16