Taking Pictures - Philips 900 Owner's Manual

Activate/deactivate Press the up volume key to
activate the flashlight; press the
the flashlight
down volume key to deactivate it.
Take a picture Press
Within any menu, press Back softkey to cancel any
current action.

Taking pictures

1. Adjust your picture, activate the flashlight if
necessary, and press
2. Once the picture is taken, a view screen is
displayed with the following options:
Discard To ignore the picture and go back to
preview mode.
To save the picture in
Save
To send the picture via MMS,
Send
Infrared. A message will tell you to switch
to phone mode.
If there is no action before the view screen time-out,
the picture is automatically saved.
Pictures are named with the date of the shot, e.g.
40
C
.
C
to take the picture.
My photos.
E-mail
"0410_154157.jpg" for a picture taken on October 4,
at 15: 41:57.
The number of pictures you can save varies according
to the settings: the higher the resolution, the bigger
the file size is. A message will warn you if there isn't
enough memory left. In this case, you must delete data
before storing a new picture.
Using the self-timer
r
1. Press
select
Self-timer
2. Adjust your picture, and press
countdown which starts at 10 seconds (this value
cannot be changed).
l
Press to stop the timer and go back to preview
mode.
3. A sound is played 3 seconds before the picture is
taken, then again when it's actually shot.
or
4. Once the picture is taken, follow the instructions
starting at point 2 described in "Taking
pictures".
to access the camera options, and
then On.
C
to launch the
Camera