Philips 900 Owner's Manual page 27

*
mailbox) and
Depending on your service provider, other hotkeys
may be predefined and locked.
1. In the list, select a key from
press OK. If the key was already programmed,
select Change.
2. Browse the list to select the function you wish to
associate with this key and press
L
Select. If you select
asked to select a contact in the contacts list.
3. To use a hotkey, press and hold the programmed
key when in idle mode.
Voice command
Allows you to set up a direct access to a specific
function by linking it to a voice tag.
You can associate a voice command to most functions
supported by the hotkeys.
1. Select <New>, then browse the list to select a
function and press
2. When
Press OK and speak
voice tag. Make sure you are in a quiet
environment, choose a short and simple word
and clearly pronounce it.
Settings
(dial international call).
2 9
to
,
dial, you will be
Flash
, L
or
Select.
appears, record your
3. The next menu gives you access to Delete, Play,
Change function
R
Press
To use the voice command, press and hold
and
in idle mode, then say the recorded voice tag.
To reprogram a voice command: select it, press
L
and select
OK
you to the list of available functions.
or
Voice dial
Allows you to set a voice tag that will dial the default
number for the corresponding contact simply by
saying the voice tag. To set up voice dial, proceed as
follows:
1. Select <New>, then a contact in the list, then
,
press
When the phonebook in phone is selected, choose the
number of your choice in the list that is displayed.
2. When
Add voice tag?
instructions displayed on the screen.
To use the voice dial, press and hold
idle mode, then say the voice tag corresponding to the
number you want to dial.
Up to 15 voice tags can be defined and shared between
voice dial and voice command. Recorded voice tags are
and Change voice
to create another voice tag.
Back
function. This will bring
Change
L
or
Options.
appears, follow the
options.
,
when
,
when in
19