Philips 900 Owner's Manual page 42

Network To select the type of network used
access when launching a connection, and to
configure the corresponding settings.
Bearer
• or GPRS: your mobile will only
GSM
use the GSM or the GPRS network
for e-mail connections.
• GPRS first: your mobile will first try
to connect to the GPRS network,
then to the GSM network if the
GPRS network isn't available.
Selecting this option you need to have
both GSM
configured.
34
and GPRS settings
GSM Settings
To change the GSM settings:
• & Password,
Login
• Phone number (ISDN
needed to establish the connection
and provided by your operator,
• disconnect, a value of over 30
Auto
seconds after which the phone
disconnects
connection was in progress).
The lack of exchanges with the network
defines the inactivity time period
leading to auto disconnection.
GPRS settings
To change the GPRS settings (same
fields as the GSM settings). The
menu lets you enter the address of the
external network you will connect to.
Error messages during connections are mainly due to
incorrect parameters: contact your operator if needed
before first use, in order to have the correct settings.
or Analogic)
automatically (if a
APN
Messages