Network - Philips 900 Owner's Manual

PIN protection
This allows you to set the PIN protection
When On, you will be asked to enter your PIN code
when switching your phone on.
You cannot change your PIN code if this option is Off.

Network

Contact your phone operator to have full information
about GPRS availability over its network and for an
appropriate subscription. You might also need to
configure your phone with the GPRS settings supplied
by your operator, by using the menus described in this
section. Then select the bearer (GSM or GPRS) in the
menus of each application to be used (e.g. WAP,
MMS, e-mail, etc.).
GPRS attach
This menu allows you to define how your mobile
phone connects to the GPRS service.
Your phone automatically connects
Always on
to the GPRS service (if available).
This option allows quicker access
to GPRS features, but increases
energy consumption.
Settings
For data calls
or Off.
On
Register again
Provides you with a list of the networks available in
the area when the
network you want to register with and press
confirm.
Preferred list
Allows you to build a network list in order of
preference. Once defined, the phone will try to
register on the network, according to your
preferences.
Access settings
This menu allows you to create different data profiles
that can be used for connecting to various services: for
example, when using WAP or when sending MMS,
the selected profile will be used to connect to the
GSM or GPRS network.
Options described below are operator and/or
subscription dependent. Error messages during
connections are mainly due to incorrect parameters:
Your phone will connect to the
GPRS service only when required.
This option reduces
consumption, but increases the
connection delay.
Manual mode is selected. Select the
energy
,
to
21