Cooking - Whirlpool MW8750XL Use & Care Manual

1.
2.
3.
4.
5.
For best results, some recipes call for stirring, turning, or adding ingredients during
cooking. Your microwave oven can be set to pause between COOK CYCLE 1 and 2 to
give you time to stir or turn the food, or to add ingredients
DO THIS...
Put tood in the oven and
close the door.
Touch in desired cook-
ing instructions for
COOK CYCLE 1 (page 10).
Touch PAUSE.
Touch in desired cook-
ing instructlons for
COOK CYCLE 2 (page
10).
Touch START.
THIS HAPPENS...
The PAUSE Signal Lrght will come on and
the Display will show the Cook Power You
selected for COOK CYCLE 1 [if other than
high], or the time selected for the COOK
CYCLE 1
When COOK CYCLE 1 is over, you will hear
one beep The oven will shut off.
The PAUSE and COOK CYCLE 2 Signal Lights
will come on. The Display will show the
time set for COOK CYCLE 2.
mq
Open the door. Stir, turn or add ingredients.
Close the door.
Touch START to continue with COOK CYCLE
2
The oven will
remain off until
you touch
START.
ADDING "PAUSE"
The PAUSE can be added while the oven is operating in COOK CYCLE 7, and if there is
to be a COOK CYCLE 2.
1 Touch PAUSE.
2 Touch START.
The microwave oven will stop automatically after COOK CYCLE 1. You will hear one
beep COOK CYCLE 2 will not begin until START is touched,
If COOK CYCLE 2 has already started, PAUSE cannot be added. Open the oven door
to stop cooking; stir or turn food; close the door and touch START
12