Cancelling; Programming; Instructions; Tone - Whirlpool MW8750XL Use & Care Manual

CHANGING OR ADDING CONTINUED
l
PAUSE
can be added only if both COOK CYCLE 1 and 2 are used, and then only
before COOK CYCLE 1 ends.
- Touch PAUSE.
- Touch START.
-
The oven will stop after COOK CYCLE j.
- Stir, turn or add ingredients.
- Touch START to continue with COOK CYCLE 2
l
Cooklng tlme
can be changed at any time during either cooking cycle:
- Touch the Cook Cycle you wish to change [COOK CYCLE 1 or 2).
- Touch numbers for the new time.
- Touch START.
-
The cycle WIII cook at the original Cook Power for the new time
l
Cook Power
can be changed at any time during either cooking cycle, or COOK TEMP.
-
Touch the Cook Cycle you wish to change [COOK CYCLE 1 or 2).
-
Touch COOK POWER if you want to change to a Cook Power other than high.
- Touch a number for the new Cook Power.
-
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
-
Touch COOK POWER
twice
if you want to change a lower Cook Power to high
- Touch START
l
COOK CYCLE
2 can be added at any time before COOK CYCLE 1 ends.
- Touch COOK CYCLE 2.
- Touch numbers for desired cooking time.
-
Touch COOK POWER, if a Cook Power other than high is desired.
- Touch a number for the Cook Power.
-
Touch START. COOK CYCLE 2 will automaticaly follow COOK CYCLE 1.
l
When using the Temperature Probe,
COOK TEMP
can be changed during
operation:
- Touch COOK TEMP
- Touch number for new temperature.
-
Touch START. The oven will continue cooking to the new temperature. If the new
temperature IS lower than the temperature of the food, the oven will shut off
l
COOK CYCLE 1 or 2 can be added anytime while QUICK DEFROST is operating:
- Touch COOK CYCLE 1 or 2.
- Touch in time and Cook Power instructions.
- Touch START.
Standing time occurs between QUICK DEFROST and COOK CYCLE 1. not
between QUICK DEFROST and COOK CYCLE 2.
CANCELLING INSTRUCTIONS
l
Touch CANCEL
to erase all instructions
or beeps except Minute rimer.
l
To cancel the Minute Timer:
-Touch MINUTE TIMER.
-Touch CANCEL.
l
Opening the oven door during cooking does not cancel cooking instructions
However, KEEP WARM
is cancelled
when the oven door is opened.
PROGRAMMING TONE
Each time you touch Q pad you will hear a tone. If you do not hear a tone, it is
because the instruction is not correct, or It is because the tones have been removed
EXAMPLE:
If you forget to plug in the Temperature Probe and touch COOK TEMP.
You will not hear u tone. The instruction is not correct.
If you want to remove the tone:
l
Open the door.
l
Touch CANCEL
twice,
then START.
l
The tone will not sound for any touch.
20