Whirlpool MW8750XL Use & Care Manual page 11

The COOK POWER Signal Light will come on
and the Display will show two O's
a.
Touch COOK POWER. (If
you want the high Cook
Power, skip to step 10.)
Touch a Number Pad for
the Cook Power you
want in the second
cycle.
10. Touch START.
When you touch START, the COOK CYCLE 1
Light will stay on while the oven IS cooking
in the first cycle The COOK POWER Light will
be on if you are using a Cook Power other
than high All other Signal Lights will go off
The Display counts down the cooking trme
to show how much time is left in each
cycle
d
count
own
For 2 of every 10 seconds of countdown,
the Display will show the Cook Power you
selected, if you are using a Cook Power
other than high
You will hear one beep at the end of COOK
CYCLE 1 You can either open the door to
check the food, or You can let the oven
start the next cycle. If you do open the
door, touch START after closing the door to
d
count
own
other than high
The Display counts down the time to show
how much time is left in the second cycle.
In 2 out of every 10 seconds, the Display will
show the Cook Power you selected if You are
using a Cook Power other than high.
When the last cycle ends you will hear
4 beeps [You can stop the beeping by
opening the door or touching CANCEL ) When
the beeping stops, the Display will show the
time of day.
CHANGING OR ADDING INSTRUCTIONS
You can change times, Cook Powers, or add COOK CYCLE 2 at anytime during oven
operation.
1. Touch the Cook Cycle You wish to change or add (COOK CYCLE 1 or 2).
2. Touch numbers for new time, if desired.
3. Touch COOK POWER, if desired.
4 Touch number for new Cook Power, or touch COOK POWER again if high is desired
5. Touch START.