Setting The Clock; Using The Minute Fimer - Whirlpool MW8750XL Use & Care Manual

SETTING THE CLOCK
1.
2.
3.
When the oven is first plugged in, the Display shows 88:88. If the electric power ever
goes off, the Display will also show all 8's when the power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display will be
blank after cooking.
The oven door must be closed before setting the clock.
DO THIS...
THIS HAPPENS...
q
.
The Signal Light on the CLOCK SET pad will
come on Start touching number pads for the
desired time within 5 seconds. The Display
will show a "0 "
Touch CLOCK SET.
The Display will show what numbers you
touched
in the order you touched them.
This example shows 3:25.
Touch Number Pads for
the correct time of day.
m
Touch START.
The Clock IS set when the CLOCK SET Srgnal
Light goes off
The Display will flash on and off if you have
touched in an incorrect time such as 12:65.
USING THE MINUTE TIMER
The MinuteTimerdoesnotstartorstopcooking;itworkslikea kitchentimer.Set in
minutesorsecondsandyouwill heara beepwhenthesettimeisup.Theovendoor
must be closed before setting the Minute Timer.
DO THIS... THIS HAPPENS...
1. Touch MINUTE TIMER.
The MINUTE TIMER Signal Ltght will come on
and the Display will show a "0." Within 5
seconds start touching number pads for
the desrred time
The Display will show what numbers you
touched
in the order you touched them.
This example shows 1 minute, 45 seconds.
2. Touch Number Pads for
minutes and seconds.
The MINUTE TIMER Signal Light will stay on to
show that the Minute Timer is running
The Display counts down the seconds to
cl
count
show how much time is left on the Minute
OWtl
Timer
CONTINUED NEXT PAGE
When the set time is up, you will hear a long
P
beep and the Display will show the time of
day.
5