Table of Contents
Advertisement
1.34
G
S
ETTING
TARTED
Speaker Volume
To adjust the volume using the On Hook Dial button:
1
Press On Hook Dial. A dial tone sounds from the speaker.
2
Press the scroll button (
you want. The display shows the current volume level.
3
Press Clear/Stop to save the change and return to
Standby mode.
Using the Save Mode
Power Save Mode
Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this mode
on by selecting the length of time for which the machine waits
after a job is printed before it switches to a reduced power state.
1
Press Menu until "Machine Setup" appears on top line of
the display.
2
Press the scroll button (
appears on the bottom line. Press Enter.
3
Press the scroll button (
bottom line and press Enter.
Selecting "Off" means that Power Save mode turns off.
4
Press the scroll button (
want appears.
The available options are 5, 10, 15, 30 and 45 (minutes).
5
Press Enter to save the selection.
6
To return to Standby mode, press Clear/Stop.
or
) until you hear the loudness
or
) until "Power Save"
or
) to display "On" on the
or
) until the time settings you
Advertisement
Table of Contents
