Table of Contents
Advertisement
8.6
T
ROUBLESHOOTING
In the Fuser Area or Around the Toner
Cartridge
W
: The fuser area is hot. Take care when removing paper
ARNING
from the machine.
1
Open the front cover and pull the toner cartridge out,
lightly pushing it down.
2
Remove the jammed paper by gently pulling it straight out.
3
Replace the toner cartridge and close the front cover.
Printing automatically resumes.
In the Manual Feeder
"
" appears on the display when you try to print
using the manual feeder and the machine does not detect paper,
due to no paper or improper paper loading.
The error message may also occur when the paper is not
properly fed into the machine through the manual feeder. In that
case, pull the paper out of the machine.
Advertisement
Table of Contents
