Table of Contents
Advertisement
Adjusting Shading
When the scanning glass becomes dirty, it can alter the shading
value. If your copy has black lines or is blurred, adjust the
shading setting.
1
Load a sheet of white paper into the ADF.
2
Press Menu on the control panel until "Maintenance"
appears on the top line of the display.
3
Press the scroll button (
appears on the bottom line and press Enter.
4
Press the scroll button (
Enter.
Your machine picks up the paper and adjusts the shading
value.
Cleaning Your Machine
To maintain the print quality, follow the cleaning procedures
below each time the toner cartridge is replaced or if print quality
problems occur.
N
:
OTES
• While cleaning the inside of the machine, be careful not to touch
the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print quality problems.
• Cleaning the cabinet of the machine with surfactants containing
large amounts of alcohol, solvent or other strong substances can
discolor or crack the cabinet.
• Keep the machine away from flammable liquids, gases, and
aerosols. A fire or an electric shock might occur.
Cleaning the Outside
Clean the cabinet of the machine with a soft lint-free cloth. You
can dampen the cloth slightly with water, but be careful not to
be let any water drip onto or into the machine.
or
) until "Adjust Shading "
or
) to select "On" and press
M
AINTENANCE
7
7.3
Advertisement
Table of Contents
