Setting The Notify Toner Option; Cleaning The Drum - Centronics IF3050 Operating Instructions Manual

Setting the Notify Toner Option

If you have set the Notify Toner menu option to "On", your
machine automatically sends a fax to your service company or
the dealer to notify them that your machine requires a new
toner cartridge when the toner cartridge needs to be replaced.
The fax number is preset by your dealer when you bought your
machine.
1
Press Menu on the control panel until "Maintenance"
appears on the top line of the display.
The first available menu item, "Clean Drum," displays on
the bottom line.
2
Press the scroll button (
on the bottom line and press Enter.
3
Press the scroll button (
Select "On" to enable this feature. Selecting "Off" disables
this feature.
4
Press Enter to save the selection.

Cleaning the Drum

If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
1
Before setting the cleaning procedure, make sure that
paper is loaded in the machine.
2
Press Menu on the control panel until "Maintenance"
appears on the top line of the display.
The first available menu item, "Clean Drum," displays on
the bottom line.
3
Press Enter.
4
When the display asks you to confirm your selection, press
Enter.
The machine prints a cleaning page. Toner particles on the
drum surface are affixed to the paper.
5
If the problem remains, repeat steps 1 through 4.
or ) to display "Notify Toner "
or ) to change the setting.
M
AINTENANCE
7
7.9