LG -P970 Service Manual page 91

1 Part Name
 Module Dimensions
3 Active Area Dimensions
4 Pixel pitch
5 Resolution
6 Color Pixel Arrangement
7 Display Mode
8 Number of Colors
9 Viewing Direction
10 Backlight
11 Weight
1 Power supply Voltage
Interface I/O power supply
13
Note(1)
14 LCD Driver IC
15 Interface
Note(1): IOVcc is the reference voltage for adjusting the I/O signal level of TA8851A.
IOVcc voltage must be determined according to a customer's system.
LGE Internal Use Only
TX10D10VM0EAA
55.54 (W)mm x 95.8 (H)mm x 1.45 (T)mm
(Excluding I/F-FPC and electronic components)
51.84 (W)mm x 86.4 (H)mm
0.108 (W)mm x 0.108(H)mm
480 x3 (R,G,B) (W) x 800(H) dots
RGB Vertical Stripe
Transmissive Type, Normally Black Mode, In-Plane Switching Mode
16,777,16 Colors / 6,144 Colors
-
Light Emitting Diode (LED), 8 LEDs are parallel connection Backlight
current: 0mA / LED (typ)
1.6g(typ)
Vcc=.8+/-0.1V, Vci=.8+/-0.1V
IOVcc=1.8+/-0.1V
The same voltage as "H" level of a customer's interface signal must be
supplied to IOVcc.
D51E6TA8851A (Source and Power IC: MagnaChip Semiconductor)
MIPI-DSI Command mode (-Lane)
Table. LCD Module general data
- 91 -
3. TECHNICAL BRIEF
Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes