Table of Contents
Advertisement
KAC-X20
CEA-2006
RMS Watts per channel @ 4 ohms, 1% THD+N .... 180W x 2
Signal to Noise Ratio (Reference: 1Watt into 4 ohms) 80dBA
Audio Section
Max Power Output ...................................................... 1000W
Rated Power Output (+B=12.0V)
Normal (4Ω) (20Hz~20kHz, 0.05% THD) ........... 120W x 2
Normal (2Ω) (1kHz, 0.5% THD) .......................... 160W x 2
Bridged (4Ω) (1kHz, 0.5% THD) ......................... 320W x 1
Rated Power Output (+B=14.4V)
Normal (4Ω) (20 Hz~20kHz, 0.05% THD) .......... 180W x 2
Normal (2Ω) (1kHz, 0.5% THD) .......................... 260W x 2
Bridged (4Ω) (1kHz, 0.5% THD) ......................... 520W x 1
Sensitivity (rated output) (MAX.) .................................... 0.2V
Sensitivity (rated output) (MIN.) ..................................... 5.0V
SPECIFICATIONS
Input Impedance ........................................................... 10kΩ
Frequency Response (+0, -3dB) ......................... 5Hz~70kHz
Signal to Noise Ratio ................................................... 105dB
Low Pass Filter Frequency (-24dB/oct.) 40~200Hz (variable)
High Pass Filter Frequency (-12dB/oct.) 40~200Hz (variable)
Infrasonic Filter Frequency (-24dB/oct.) ................... 15/25Hz
Bass Boost Circuit ................................... 0~+18dB (variable)
Bass Boost Frequency .......................... 40~100Hz (variable)
General
Operating Voltage ......................... 14.4V (11~16V allowable)
Current Consumption ...................................................... 47A
Installation Size (W x H x D) .................... 380 x 65 x 286mm
........................................... 14-15/16 x 2-9/16 x 11-1/4inch
Weight ............................................................ 4.6kg (10.1lbs)
KENWOOD follows a policy of continuous advancements
in development.
For this reason specifications may be changed without notice.
INSTALLATION
380 mm
320 mm
Ø6
Advertisement
Table of Contents
