Specifications - Kenwood KA-95 Instruction Manual

Stereo integrated amplifier
Hide thumbs Also See for KA-95:
Table of Contents

Advertisement

Specifications
(IHF'66)
Power Amplifier Section
Rated Power Output
125 watts per channel minimum RMS, both channels driven at 8 ohms from 20 Hz
to 20,000 Hz with no more than 0.05%
total harmonic distortion
Both Channels Driven into 8 ohms at 1 kHz
Total Harmonic Distortion
{AUX— SPKR
8 Q)
at Rated Output. 20 Hz ~ 20,000 Hz
at 1/2 Rated Output, 20 Hz ~ 20,000 Hz
at 1/2Rated Output, 1 kHz
(PHONO— SPKR 8 2) : at — 20 dB VOLUME Level)
at Rated Output. 1 kHz
Intermodulation Distortion
(60 Hz:7 kHz = 4:1)
Damping Factor
Frequency Response
input Sensitivity/Impedance
Phono MM
TUNER, AUX., TAPE PLAY
Signal-to-Noise Ratio (IHF-A)
Phono MM
Phono MM
TUNER, AUX., TAPE PLAY
Maximum Input Level for Phono MM
Output Level/Impedance
TAPE REC (Pin}
Frequency Response for Phono
Tone Control
Bass
Treble
Loudness Controt {at — 30 dB VOLUME Level}
Subsonic Fier
General
Power Consumption
AC Outlets
Dimensions
Weight (Net)
125 W+
125 W (Except USA,
Europe and U.K.)
0.05%
0.02%
0.007%
0.02%
0 02%
at rated power
into 8 ohms
20 (1,000 Hz into 8 ohms}
10 Hz to 100 kHz,
+0 dB, -3 dB
2.5 mV/47 k ohms
150 mV/33 k ohms
73 dB tor 2.5 mV input
79 dB for 6.0 mV input
100 dB
140 mV (RMS), T.H.D.
0.05% at 1 kHz
150 mV/3.3 k ohms
RIAA standard curve +0.3 dB
(30 Hz to 20,000 Hz)
+10 dB at 100 Hz
+8 dB at 10 kHz
+8 dB at 100 Hz
18 Hz. 6 dBfoct
41 AIUSA and Canada : UL and CSA)"
230 W {Others}
Switched 2, Unswitched
1
(Except some countries)
W420
mm
(16-9/16")
H
103 mm (4-5/16")
D
280 mm
(11")
5
kg (18.7 Ib)
Note
we
Wet
Boa
eka
Oh
ONHAUOUS
advare
er ents in devet
tment
For this reason specifications may
be changed without notice
afl:

Advertisement

Table of Contents
loading

Table of Contents