Agc; Apc; Adc; Target Power - LG gd350 Service Manual

11.5 AGC

This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the result
window will show correction values per every power level and gain code and the same measure is
performed per every frequency.

11.6 APC

This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.

11.7 ADC

This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table will be reset.

11.8 Target Power

BAND
GSM 850
EGSM 900
DCS1800
PCS 1900
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Description
Channel
Frequency 824.2 MHz
Max power 33 dBm
Channel
Frequency 880.2 MHz
Max power 33 dBm
Channel
Frequency 1710.2 MHz
Max power 30 dBm
Channel
Frequency 1850.2 MHz
Max power 30 dBm
135/148 135/148
11. AUTO CALIBRATION
Low Middle
128 191
836.8 MHz
33 dBm
975 37
897.4 MHz
33 dBm
512 699
1747.6 MHz
30 dBm
512 661
1880 MHz
30 dBm
- 17 -
11. AUTO CALIBRATION
High
251
848.8 MHz
33 dBm
124
914.8 MHz
33 dBm
885
1784.8 MHz
30 dBm
810
1909.8 MHz
30 dBm
LGE Internal Use Only