Table of Contents
Advertisement
General
Product description
The RCU 10 consists of a communications module with
integrated GSM modem, antenna for the GSM modem
and a separate power supply unit for plugging into a wall
NOTE!
socket. The antenna can be located outside the enclosure.
The RCU enables operations to be controlled and moni-
tored using a computer or by a principle system (SCADA-
If a SIM card is used, it must be configured
system), which can read the ModbusTCP-protocol, in a
so that a PIN code is not used to obtain
local network or via the internet.
connection. This can be done in a mobile
It is possible to connect to the RCU two independent
telephone or by the service provider.
switch functions to detect external events such as a move-
ment alarm or freezing protection.
Note that all configuration of the unit requires that a com-
puter with support for "JAVA-applets" is connected, even
if only text messaging is going to be used.
The RCU enables operations to be controlled and moni-
tored using a computer connected to a local network or
via the Internet. The integrated GSM module also enables
control and monitoring by sending text messages from a
mobile phone. For the GSM function to work, the commu-
nications module must be equipped with a valid GSM sub-
scription. This may for example be a cash card or a special
telematics subscription.
RCU 11
3
Hide quick links:
Advertisement
Table of Contents
