Table of Contents
Advertisement
Web interface – FIGHTER 360P
Alarm/status
This form shows the common alarms that the heat pump
has indicated.
External alarm inputs DI1 and DI2 are not concerned with
the heat pump functions but are self-defined functions,
e.g. movement alarm and freezing protection.
Factory settings
Click on the "Factory settings" button to reset all settings
in the FIGHTER 360P to their original states.
Restarting
Click on the "Restart FIGHTER 360" button to restart the
FIGHTER 360P. This is the same function as manually swit-
ching the heat pump on and off using the power switch.
22
Log
Here the log files that are in the RCU can be fetched. The
parameter log contains selected logged values (see the
"Web interface – Settings" > "Log" section).
The alarm log contains all the alarms that have been indi-
cated and a number of temperatures registered at the time
of each alarm.
The log files can be cleaned out by clicking on the "Clean
log file" button for the appropriate log.
The log files are in CSV format, which is a standard format
that can be imported into several kinds of calculation pro-
gram for further processing.
RCU 11
Hide quick links:
Advertisement
Table of Contents
