How To Connect Your Recorder; Analog Connections; Digital Connections - Philips CDR-775 Owner's Manual

xp CDR 775/00.1 english 10-07-2001 13:19

How to connect your recorder

Tip:
If the integrated CD player deck will be the only
source from which you are going to record, just
connect the analog output for playback of the CD
recorder to your amplifier/receiver (cable 1).

Analog connections

These connections are required for playback on the CD
recorder deck as well as the CD player deck (cable 1). Cable 2
is required for making recordings from an external analogue
source (e.g. via amplifier: cassettedeck or turntable).
RECORD PLAYER
CD PLAYER
3
3
AMPLIFIER/
RECEIVER
CD RECORDER
1
Connect supplied audio cable between the ANALOG
OUT-sockets on the CD recorder and the ANALOG input
sockets of the amplifier/receiver (TAPE, CD-R, AUX or
PLAY IN, LINE IN).
Insert the red plugs into the R sockets, and the white plugs
into the L sockets.
2
Connect supplied audio cable between the ANALOG IN-
sockets on the CD recorder and the analog outputs of the
amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC
OUT, LINE OUT etc.).
Insert the red plugs into the R sockets, and the white plugs
into the L sockets.
3
Connect all other components of your system (tape deck,
CD player, tuner, record player etc.) via their ANALOG
OUT-sockets to the appropriate analog input sockets of
the amplifier/receiver (CD IN,TUNER IN, AUX IN,
PHONO IN etc.).
Any analog device, connected to the amplifier/receiver
can now be used as recording source (ANALOG).
12
Pagina 12
Analog connection CD player deck (DJ-mode)
This connection is only required if you want to playback on the
CD player deck seperately from the CD recorder deck..
This will be the case in DJ-mode.
1
For separate playback on the CD player deck, connect a
third cable 3 (not supplied) between the ANALOG OUT
sockets of the CD recorder and the input sockets of an
amplifier e.g. CD, or AUX.
Insert the red plugs into the R sockets, and the white plugs
into the L sockets.
Notes:
Never use the PHONO input.
Your CD recorder/player is equipped with a digital coaxial
output for the CD player deck.This output can be used for
digital playback.
2
1
CD
CDR CDR
CD CDR CDR
CD CDR
L
L
L
R
R
R

Digital connections

OUT OUT
IN OUT
ANALOG DIGITAL IN OUT IN
ANALOG
DIGITAL OPTICAL
Digital coaxial connection
This connection is only required for direct recording from an
external digital coaxial source (e.g a CD player, DVD, DAT).
1
Connect a digital coaxial cable between the DIGITAL IN-
socket on the CD recorder and the DIGITAL OUT socket
of the digital source.
Recording can now be done via the digital coaxial input
(DIGITAL1).
DIGITAL
RECEIVER
CD RECORDER
1
CD
CDR CDR
CDR
CD CDR
CD CDR
L
L
R L
CD RECORDER
R
R
OUT OUT
IN OUT
ANALOG DIGITAL IN OUT
IN
ANALOG DIGITAL OPTICAL
CD PLAYER
CD RECORDER
1
CD
CDR CDR
CD CDR
CDR
CD
L
L
L
R
R
R
OUT
OUT
IN
OUT IN
ANALOG DIGITAL OUT
ANALOG
DIGITAL
CDR
IN
OPTICAL