Connections; Which Connections Do You Need; Explanation Of Connections - Philips CDR-775 Owner's Manual

xp CDR 775/00.1 english 10-07-2001 13:19
1

Which connections do you need?

For playback on the CD recorder
(and/or CD player deck) the following outputs are present:
- Digital coaxial output (CD & CDR - DIGITAL OUT) 7;
- Analog output (CD & CDR - ANALOG OUT) 5.
We advise you to connect these to the TAPE or CDR input
on your amplifier.
For recording from internal player deck no
connections are needed.
For external recording the following inputs are present:
- Digital optical input (CDR - OPTICAL IN) 8;
- Digital coaxial input (CDR - DIGITAL IN) 6;
- Analog input (CDR - ANALOG IN) 4.
For playback of CD player deck separately
(DJ mode) from the CD recorder the following outputs are
present:
- Digital coaxial output (CD) 3;
- Analog output (CD) 2.
The connections you make will depend upon the
possibilities your audio equipment offers. Please refer to the
user manuals for your other audio equipment first.
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track increment).
The digital optical connection is less sensitive to external
disturbances.
We advise you to always establish both digital and analog
connections.This will mean that analog recordings can
always be made when digital recording is not possible.
We have described the most common ways of connecting
the CD recorder. If you still have difficulties with the
connections, please contact the Philips Consumer Service
desk in your area.
Pagina 11
AUDIO CD PLAYBACK
CD
CDR
L
L
R
R
OUT
OUT
IN OUT
ANALO G
DIGITA L
ANALO G
2 3 4 5

Explanation of connections

1 Connection to mains
2 ANALOG OUT CD
connects to the line (analog) input of an amplifier/receiver,
so you can listen to playback of the CD player deck via the
amplifier/receiver (only needed for separate playback of
CD player deck in DJ mode)
3 DIGITAL OUT CD
connects to the digital coaxial input of an amplifier/receiver,
so you can listen to playback of the CD player deck via the
amplifier/receiver (only needed for separate playback of
CD player deck in DJ mode)
4 ANALOG IN CDR
Note: It is not possible to connect a record player directly to the
CD recorder. Recordings can only be made from a record
player connected via amplifier or receiver.
connects to the line (analog) output of an amplifier/receiver
or other analog source (tape deck, tuner etc.), so you can
record from this source (ANALOG). For recording from a
record player both recorder and record player should be
connected to an amplifier/receiver
5 ANALOG OUT CD & CDR
connects to the line (analog) input of an amplifier/receiver,
so you can listen to playback of this CD recorder via the
amplifier/receiver
6 DIGITAL IN CDR
connects to the digital coaxial output of an external digital
source (CD player, DVD, DAT, etc.), so you can record from
this source (DIGITAL1)
7 DIGITAL OUT CD & CDR
connects to the digital coaxial input of an amplifier/receiver,
so you can listen to playback of the CDR or CD deck via
the amplifier/receiver
8 OPTICAL IN CDR
connects to the digital optical output of an external digital
source (CD player, DVD, DAT, etc.), so you can record from
this source (OPTICAL)

Connections

CDR
CD CDR CDR
CD CDR
L
R
IN OUT
IN
DIGITA L OPTIC AL
6 7 8
11