Search; Shuffle (Random Order) Play; Repeat Cd, Track Or Program; Programming Tracks - Philips CDR-775 Owner's Manual

xp CDR 775/00.1 english 10-07-2001 13:19

Search

EASY JOG
STORE/
MENU
ENTER
1
Hold down 5 or 6 (in Play mode).
The player first searches backwards or forwards at
10 times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
2
Release the button at the desired passage.
Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search
is restricted to within the track being played at the time.
Shuffle (random order) play
Only in Changer mode.
1
Press SHUFFLE before or during CD play to start shuffle
play.
The tracks on the CD (or program if set) will play in
random order.
2
Press SHUFFLE again to return to normal CD play.
CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.

Repeat CD, track or program

1
Press repeat one or more times during CD play.
When lights up, the current track will
REPEAT TRACK
play repeatedly.When
REPEAT ALL
disc or program plays repeatedly.
2
To return to normal play, press REPEAT one or more times
until:
The text disappears from the display.
REPEAT
Note:
You can use shuffle in combination with
programmed play.
is also cleared when you open the disc tray.
REPEAT

Programming tracks

You can program up to 99 tracks to play in any desired
0
sequence.
Tracks can be programmed more than once, but each time
0
counts as a track ( ).
STEP
Pagina 25
A program for playback can be made from both the disc in
0
the recorder deck and the disc in the player deck. A
program for recording can only be made from the disc in
the player deck.
CANCEL/ Programming
DELETE
1
Select Changer mode or DJ mode using the DJ MODE key.
CHANGER or DJ MODE appears on the display.
2
Press CDR or CD to select the required deck.
AUDIO CD PLAYBAC K
Selected key lights up.
3
In Stop mode press PROG to enter Program mode.
PROG
information appears on the display.
4
Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
The track will be stored in the program.
The track number, total program time and the number
of programmed tracks (
5
Repeat step
6
Press STOP 9 or PROG to end programming.
PROG
7
Press PLAY/PAUSE 2; to start programmed play.
Notes:
To review the program, press PROGRAM, followed
by 5 or 6 with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps 3 to 7.
If you try to store more than 99 tracks, PROG FULL will
appear on the display.
Clearing a program
1
Press STOP 9 if necessary to stop programmed play.
lights up, the entire
2
Press STOP 9 again to clear the program.
PROG
The program is also cleared when you open the disc tray.
0
Erasing a track from a program
1
In Stop mode press PROG to enter Program mode.
or
REPEAT ALL 2
Use 5 or 6 to select the track from to be deleted.
The track number and program step will be shown on
the display.
3
Press CANCEL/DELETE to erase the track from the
program.
The remaining program steps and the remaining playing
time on the program will be displayed.
4
Repeat steps
5
Press STOP 9 or PROG to end erasing.
PROG
Playing
flashes and PROGRAM followed by track
) are displayed.
STEPS
4
for all tracks to be programmed.
lights continuously.
will disappear from the display.
2 3
and for all tracks to be erased.
will light up continuously.
25