Adding Forticlient Installations - Fortinet FortiAnalyzer-100A Administration Manual

Devices
1
2
3

Adding FortiClient installations

1
2
3
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925
To add an HA cluster
Go to Device > All
Select Unregistered from the Show list, and select Add from the Action column.
or
Select Add Device.
Configure the same settings as indicated in the section
on page 68, using the information for the primary unit, with the following
exceptions:
• Set the Mode to HA.
• Enter the device IDs (serial numbers) for each subordinate unit in the cluster
and select Add.
The FortiAnalyzer unit can store FortiClient log messages for reporting purposes.
Unlike logging FortiGate units, you configure the FortiAnalyzer unit to accept all
FortiClient log messages, rather than individual users. To obtain network histories
for individual users, use the FortiAnalyzer reporting features.
To register a FortiClient installation to send log messages to the
FortiAnalyzer unit
Go to Device > All.
Select Unregistered from the Show list, and select Add from the Action column.
or
Select Add Device.
Set the following options and select OK.
Device Type Select FortiClient from the device list. It is selected by default
when selecting a FortiClient installation from the unregistered list.
Device Name The default selection is for all FortiClients.
Description by default, the description indicates that the FortiClient selection is
for all connected FortiClient installations.
Administrative Select the administrative domain (ADOM) that the device will be
associated with. This selection is visible when using the ADOM
Domain
feature. For more information on ADOMs, see
settings" on page
Allocated Disk Space Set the allocated amount of the FortiAnalyzer hard disk to log and
content messages for the device. The amount allocated will also
(MB)
include disk space set aside for quarantined files. For details on
quarantine file disk allocation, see
settings" on page
A disk space setting of zero is unlimited.
When Allocated Disk Select what the FortiAnalyzer unit should do when the allocated
disk space has been reached. Select either overwriting older files
Space is All Used
or stop logging.
Unlike other devices, a FortiClient connection can only send log messages to the
FortiAnalyzer unit. You cannot configure it so that a user can view their log
messages or specific reports.
"Adding a FortiGate unit"
"Administrator
39.
"Configuring quarantine
95.
Adding FortiClient installations
71