Table of Contents
Advertisement
Charging the Battery Pack
• If the ambient temperature or the battery pack's temperature
is low, charging may take longer than usual.
• The battery pack will be charged only when the camcorder is
off.
• If the power supply was disconnected while charging a bat-
tery pack, make sure the POWER/CHG indicator has gone
out before restoring the power supply.
• When the POWER/CHG indicator goes out, the approximate
battery charge shown in 1
not be at 100%. In such case, turn off the camcorder again to
charge further.
• If remaining battery time is an issue, you can power the cam-
corder using the compact power adapter so the battery pack
will not be consumed.
• Charged battery packs continue to discharge naturally. There-
fore, charge them on the day of use, or the day before, to
ensure a full charge.
• Battery packs for this camcorder can display the remaining
battery time. The first time you use a battery pack, fully charge
it and then use the camcorder until the battery pack is com-
pletely exhausted. Doing so will ensure that the remaining
recording time will be displayed accurately.
• For details about how to take care of the battery pack, refer to
Battery Pack
usage times, refer to the
>
(A 260). For charging times and approximate
Reference Tables
28
q
>
[Battery Info] may
(A 275).
Advertisement
Table of Contents
