Table of Contents
Advertisement
The Camcorder's Wi-Fi Functions
2
With the camcorder turned off or displaying an index screen
in playback mode, carefully hold the NFC touchpoint on the
camcorder close to the NFC connect point on the connect
station.
• Align the camcorder's
point on the connect station.
• If there is no reaction, try adjusting slightly the position/angle of
the camcorder while carefully holding it close to the connect
point on the connect station, or very gently touching the cam-
corder to the connect station.
• If the camcorder was turned off, it will turn on in playback mode.
• The connect station will emit a beep sound. When the Wi-Fi con-
nection is correctly established, the transfer of files will start auto-
matically.
3
Camcorder: When the file transfer is completed, touch [OK].
• Saving a scene that is about 4 minutes long will take approxi-
mately 5 minutes. When saving a large number of files, the
operation may take some time.
• Be sure to always use the latest version of the connect sta-
tion's firmware. Updating the firmware to the latest version
may correct known issues and add new functionality to the
connect station. For details about updating the firmware, refer
to the instruction manual of the CS100.
mark with the center of the connect
173
Advertisement
Table of Contents
