Canon VIXIA HF R80 Important Usage Instructions page 207

Appendix: Menu Options Lists
• The file number and folder name also indicate the location of the file
on the memory. A recording with the file number "101-1234", made
on October 25 will be found in the folder DCIM\101_1025. If it is a
movie, its file name will be MVI_1234.MP4; if it is a photo, its file name
will be IMG_1234.JPG.
[Auto Power Off]: In order to save power when the camcorder is pow-
ered by a battery pack, it will automatically shut off if left without any
operation for 3 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto
Power Off] will appear. Operating any of the camcorder's controls
while the message is displayed will prevent the camcorder from shut-
ting off.
[Power On Using LCD Panel]: When this setting is set to [Enable],
opening the LCD panel turns the camcorder on, while closing the LCD
panel turns it off. Set to [Off] to deactivate this feature. In either case,
you can still use [.
[USB Connection Type] (playback mode only): Selects the type of
connection used by default when the camcorder is connected to an
external device using a USB connection.
[ Computer] or [
you plan to connect the camcorder to only one type of device (a com-
puter or the optional CS100 Connect Station, respectively).
[ Connect and Set]: This setting is more convenient if you do not
plan to use the camcorder with only one type of device and will connect
it sometimes to a computer and sometimes to the optional CS100 Con-
nect Station.
Connect Station]: Select one of these settings if
207