Canon VIXIA HF R80 Important Usage Instructions page 244

Trouble?
Need to recover files from the memory card. Change the position
of the LOCK switch on the memory card.
- This message will appear the next time you turn on the camcorder
if power supply was accidentally interrupted while the camcorder
was writing on the memory card and later the position of the card's
LOCK switch was changed to prevent erasure. Change the posi-
tion of the LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (A 31).
- The memory card may not be inserted correctly. Insert the memory
card all the way into the memory card slot until it clicks.
Not enough available space
- Delete some recordings on the memory card (A 69).
- Set the video quality to [Long Play] (4 Mbps) (A 74).
Recording was stopped due to insufficient write speed of the mem-
ory card
- The data transfer rate was too high for the memory card in use
and recording was stopped. Replace the memory card with one
rated CLASS 4, 6 or 10 (CLASS 6 or 10 when recording movies
with a video quality of 35 Mbps).
- After repeatedly recording and deleting scenes (fragmented mem-
ory), it will take longer to write data on the memory card and
recording may stop. Save your recordings (A 141) and initialize
the memory card using the [Complete Initialization] option (A 38).
Scene recorded using another device. Cannot play back the scene.
- Scenes that were not recorded with this camcorder cannot be
played back with this camcorder.
244